YOKOGAWA FG420 - CH1;CH2 Switching Key and Active Channel (FG420 Only)

42
IM FG410-01EN
4. BASIC OPERATION
4.3.6 CH1/CH2switchingkeyandactive channel (FG420 only)
The channel to be set is switched each time the CH1/CH2
switching key is pressed.
This key is invalid in setting screens that are channel
independent.
The channel that is to be set is called the “active channel” in
this product. In the burst oscillation mode, etc., the
MAN TRIG
MAN
TRIG key works for the active channel. Even if the screen is
changed to a channel independent screen, the channel that was
active up to that point is saved.
CH 1/CH 2
CH 1/CH 2
CH1 active
(CH1 = channel to be set)
CH2 active
(CH2 = channel to be set)
NEXT
MENU
FCTN OU
T
CH 1/CH 2
±10V
Zout 50Ω
CH1/CH2
switching key.