YOKOGAWA FLXA402 - Model & Suffix Codes

<1. INTRODUCTION AND GENERAL DESCRIPTION>
1-9
IM 12A01F02-02EN 2nd Edition : Feb. 19, 2019-00
1.4 Model & Su󰀩x Codes
Model Su󰀩x code Option code Description
FLXA402 ······································································· ················· 4-Wire Converter
Power
supply
-A
-D
·················
·················
AC version
DC version
Housing
(*1)
-B
-D
·················
·················
Aluminum alloy cast + urethane coating
Aluminum alloy cast + high anti-corrosion coating
Type -AB
-AD
-AG
-AJ
·················
·················
·················
·················
General purpose for CE, RCM, China standard
General purpose for CSA
General purpose for KC
General purpose
1st input -P1
-C1
-C5
-D1
-D5
-S5
·················
·················
·················
·················
·················
·················
pH/ORP (PH)
Conductivity (SC)
Inductive conductivity (ISC)
Dissolved oxygen (DO)
Digital sensor (pending)
SENCOM SA (*2)
2nd input -NN
-P1
-C1
-C5
-D1
-S5
·················
·················
·················
·················
·················
·················
Without input
pH/ORP (PH)
Conductivity (SC)
Inductive conductivity (ISC)
Dissolved oxygen (DO)
SENCOM SA (*3)
mA Output/Input -A2
-A4
·················
·················
2 x 4-20 mA Output + 1 x Contact Input (mA1 output:
with HART)
4 x 4-20 mA Output + 2 x Contact Input + 1 x 4-20 mA
Input (mA1 output: with HART)
Contact Outputs -WR
-NR
·················
·················
Contact outputs
Without Contact outputs
Bluetooth -N
-B
·················
·················
Without Bluetooth
Bluetooth
Digital Communication -N
-E
-R
················
·················
·················
Without Digital communication
Modbus TCP/IP
Modbus RTU (RS-485)
Country (*4) -N
-J
················
················
Global except Japan
Japan
— -NN ················· Always -NN
Option Mounting hardware
Hood
Tag plate
Conduit adapter (*7)
/UM
/U
/PM
/H6
/H7
/SCT
/CB4
/CD4
/CF4
/CB6
/CD6
/CF6
Universal mounting kit (*5)
Pipe and wall mounting hardware
Panel mounting hardware
Hood, stainless steel
Hood, stainless steel + urethane coating
Stainless steel tag plate
G1/2 x 4 pcs
1/2NPT x 4 pcs
M20 x 1.5 x 4 pcs
G1/2 x 3 pcs + G 1/2 for Ethernet x 1 pcs (*6)
1/2NPT x 3 pcs + 1/2 NPT for Ethernet x 1 pcs (*6)
M20 x 1.5 x 3 pcs + M20 for Ethernet x 1 pcs (*6)
Notes:
*1.
Urethane coating is acid resistant.
*2. On 1st input, with a connection to BA11 Junction Box, up to 4 sensors equipped with SA11 can be connected.
*3. On 2nd input, only 1 sensor equipped with SA11 can be connected.
*4. Select only “-J” if you use the converter in Japan. Only SI unit (International System of Units) applies.
*5. Universal mounting kit contains pipe, wall mounting hardware (/U) and panel mounting hardware (/PM).
*6. Available only when “-E” (Modbus TCP/IP) via digital communication is selected.
*7 There are 8 cable entry holes. Check the table below. If you need, purchase the adapters additionally to comply with
requirements in the specication.
Spec. Power
1st
input
2nd input mA output/input Contact Outputs Digital Communication
Code All All -NN
the
others
-A2 -A4 -WR -NR -N -E -R
Required No.of cable
entry holes
1 1 0 1 1 2 2 0 0 1* 1
*: Conduit exclusively for Ethernet