MODBUS Communication
7
TI 12A01F01-62EN
2.1 COIL: Coil register
address item name Value/description
0 Reserved all 0
Do not change.
1
2
3
4
5
6
7
30 WRITE_STATUS Read only
Shows access authority.
31 WRITE_FLAG Gains access authority.
Turn ON this coil bit when modifying the setting by
Modbus protocol
50 CONVERTER_RESTART Restarts the converter
51 SQUAWK_SWITCH Starts backlight ashing.
On: Flash Once: After lighting on for 5 sec, automatically
lights o.
Endless: Light On until cancelling the ash
O: Stop the ash
52 MA_HOLD_0 mA output manual Hold status
ON: Hold
O: Hold o
53 MA_HOLD_1
54 MA_HOLD_2
55 MA_HOLD_3
56 S_MANUAL_WASH_0 Starts manual wash
On: Wash starts (after the wash time elapses, turns o
automatically)
O: Cancel Wash. The cancellation switches the mode to
Wash Recovery.
57 S_MANUAL_WASH_1
58 S_MANUAL_WASH_2
59 S_MANUAL_RECOVER_0 The cancellation of Wash switches the mode to Wash
Recovery automatically.
On: Switching to Wash Recovery enables this function
automatically, disabling manual switching from O
to On. When Wash recovery time elapses, the mode
automatically turns O.
O: Exit from Wash Recovery
60 S_MANUAL_RECOVER_1
61 S_MANUAL_RECOVER_2
62 S_ERROR_CANCEL_0 Cancels the error “Expiry time exceeded.”
Cancel the error with “On” then automatically switches
“O”
63 S_ERROR_CANCEL_1
64 S_ERROR_CANCEL_2
65 S_ERROR_CANCEL_3
66 AD_TOUCH_SCREEN_FLAG HMI of the converter switches from Adjust panel to Touch
panel.
Apr. 19, 2019-00
To Next Page
Loading...
