10 - 7
IM 4H3B1-01E
0. GENERAL SPECIFICATIONS
EMC Conformity Standard(for standard model except for /P1 model)
EMI EN55011: Class A
EMS EN50082-2
IEC1000-4-2:
Electrostatic Discharge
8 kV(Air ) Performance Criteria B
4 kV(Contact)
IEC1000-4-3: Radiated fields
80MHz-1000MHz 10V/m
Performance Criteria A
(Pen Model: ± 5% of Range)
(Dot Model: ± 20% of Range)
IEC1000-4-4: Fast Transient
AC power line 2kV The others 1 kV
Performance Criteria B
IEC1000-4-6:
Conducted Disturbance
0.15MHz - 80MHz, 10V Performance Criteria A
( ± 5% of Range)
IEC1000-4-8: Magnetic Field 50Hz, 30A/m Performance Criteria A
CONSTRUCTION
Mounting: Flush Panel Mounting (vertical), mounting next to each other (horizontal).
Mounting may be inclined up to 30°, rear below front (with horizontal base).
Allowable Panel Thickness: 2 to 26mm.
Material: Case: drawn steel, front door: aluminium die casting.
Finish: Case and door-frame: lampblack (Mansell 0.8Y 2.5 / 0.4 or equivalent).
Door: Splash-proof (in accordance with DIN 40050-IP54).
Dimensions: 288(W) × 288(H) × 220(D) mm
Weight: 1 pen model 8.9kg 6 dot printing model 9.1kg
2 pen model 9.0kg 12 dot printing model 9.4kg
3 pen model 9.2kg 18 dot printing model 9.5kg
4 pen model 9.4kg 24 dot printing model 9.6kg
POWER SUPPLY
Rated Power Voltage: for others than /P1 model; 100 to 240VAC, automatically selected depending on the
power supply voltage.
45 to 65Hz, automatically adjusted.
/P1 model; 24VDC
Usuable Power Voltage Ranges: for others than /P1 model; 90 to 132, 180 to 250VAC
/P1 model; 21.6 to 26.4VDC
Rated Power Frequency: 50/60Hz, no need to change switches (for others than /P1 model)
Power Consumption: (for others than /P1 model)
/P1 model; 23VA (4 pen), max 50VA
NORMAL OPERATING CONDITIONS
Power Voltage: for others than /P1 model; 90 to 132, 180 to 250VAC
/P1 model; 21.6 to 26.4VDC
Power Frequency: 50Hz ±2%, 60Hz ±2% (for others than /P1 model)
Ambient Temperature: 0 to 50°C
Ambient Humidity: 20 to 80% RH (at 5 to 40°C)
Vibration: 10 to 60Hz, less than 0.02G
Shock: not permissible
4 pen
dot
100VAC
Power Source
240VAC
Power Source
max.
30VA*
23VA*
40VA*
32VA*
70VA
70VA
*: in balance
To Next Page
Loading...
