5-8
IM MT300-02EN
Communication Information (Remote Info)
Displayed Information
Command Type The command type
GPIB Address The GPIB address
USB Function The USB function
IP Address The IP address
Subnet mask The subnet mask
Default Geteway The default gateway
Calibration Date Information (Cal Info)
This screen shows the last date pressure, DMM function (/DM option), and D/A output (/DA option)
were calibrated. When you press the Detail soft key, the date the instrument was calibrated at
Yokogawa (Factory Calibration Date) and the date you calibrated the instrument (User Calibration
Date) are shown.
Last Calibration Date (Latest)
Detailed Display of the Last Calibration Date (Detail)
Note
For details on how to enter the user calibration date, see section 5.8.
5.4 Viewing System Information (Overview)
To Next Page
Loading...
