IM 04P01B01-01E
xiv
5.3 Setting the Unit on Scaled Channels ................................................................................. 5-12
5.4 Changing the Chart Speed ................................................................................................ 5-13
5.5 Setting the Date/Time ........................................................................................................ 5-14
Chapter 6 Setup Operations for Convenient Functions (Setting Mode)
6.1 Setting the Trend Recording Interval (Dot Model) ............................................................... 6-1
6.2 Setting the Filter (Pen Model) .............................................................................................. 6-3
6.3 Setting the Moving Average (Dot Model) ............................................................................. 6-4
6.4 Setting Recording Zones for Each Channel (Zone Recording) ........................................... 6-5
6.5 Setting the Partial Expanded Recording .............................................................................. 6-6
6.6 Turning Trend Recording (Dot Model) and Periodic Printout ON/OFF for Each Channel .... 6-7
6.7 Setting Tags on Channels .................................................................................................... 6-8
6.8 Setting the Message String .................................................................................................. 6-9
6.9 Setting the Secondary Chart Speed (Remote Control Function, /R1) ............................... 6-10
6.10 Setting the Alarm Delay Duration ........................................................................................6-11
6.11 Setting the Brightness of the Display and Internal Light .................................................... 6-12
6.12 Applying a Bias on the Measuring Input Signal ................................................................. 6-13
6.13 Performing Calibration Correction (/CC1 Option) .............................................................. 6-14
6.14 Setting Up Start Printout and End printout (/BT1 Option) .................................................. 6-16
6.15 Setting the Message Format (/BT1 Option) ....................................................................... 6-20
6.16 Setting the Date/Time When Switching between Standard Time and DST ....................... 6-22
Chapter 7 Setup Operations for Changing/Adding Functions (Basic Setting
Mode)
7.1 Changing the Auxiliary Alarm Function ................................................................................ 7-1
7.2 Changing the Integration Time of the A/D Converter ........................................................... 7-4
7.3 Setting the Burnout Detection Function of Thermocouples ................................................. 7-5
7.4 Setting the RJC Function on Channels Set to TC Input ...................................................... 7-6
7.5 Changing the Channel Recording Color (Dot Model) .......................................................... 7-8
7.6 Recording by Compensating for the Pen Offset along the Time Axis (Pen Model) ............. 7-9
7.7 Turning Printouts ON/OFF
(Selecting the Channel/Tag Printout and Turning ON/OFF the Channel No., Alarm, Recording
Start, New Chart Speed, Scale, and Pen Color Printouts) ................................................ 7-10
7.8 Setting the Periodic Printout Interval and the Type of Data to Be Printed ......................... 7-12
7.9 Setting the Bar Graph Display Mode ................................................................................. 7-15
7.10 Setting the Key Lock Function ........................................................................................... 7-16
7.11 Enabling the Moving Average Function (Dot Model) ......................................................... 7-19
7.12 Enabling the Filter Function (Pen Model) .......................................................................... 7-20
7.13 Enabling the Partial Expanded Recording Function .......................................................... 7-21
7.14 Changing the Display/Printout Language .......................................................................... 7-22
7.15 Enabling the Bias, Low-Cut, Alarm Delay, Calibration Correction (/CC1 Option) Functions
........................................................................................................................................... 7-23
7.16 Changing the Time Printout Format ................................................................................... 7-25
7.17 Initializing the Settings ....................................................................................................... 7-27
7.18 Assigning Functions to the Remote Control Input Terminals (/R1 Option) ........................ 7-28
7.19 Changing the Printout/Display Format of the Date ............................................................ 7-30
7.20 Selecting to Show/Hide the FUNC Key Menus .................................................................. 7-31
7.21 Selecting to Show/Hide Setting Mode Menus .................................................................... 7-33
7.22 Enabling/Disabling the Customized Menu ......................................................................... 7-35
7.23 Setting the Calibration Correction Function (/CC1 Option) ................................................ 7-38
7.24 Enabling Start Printout, End printout, and Message Format (/BT1 Option) ....................... 7-40
7.25 Changing the Temperature Unit ......................................................................................... 7-42
Contents
To Next Page
Loading...
