YOKOGAWA MuR10000 - Page 54

IM 04P01B01-01E
1-36
Item Description Reference
Section
Periodic printout
Measured value
Scale
Channel number
or tag
Recording color
Mar.31.2004!
15:50*
1 1.000V
2 -1.000V
0.000 2.000
1 V
RED
50mm/h_
• Type of measured values to be printed/disable periodic printout 7.8
Use Print1 in Basic Setting mode to set the type of measured values to be printed.
You can select Inst, Report (statistical calculation value), or Off.
• If Report is selected, use Print2 in Basic Setting mode to select the report data type. 7.8
• Printout interval 7.8
Use Print 1 in Basic Setting mode to set the periodic printout interval.
• Turn On/Off periodic printout for each channel 6.6
Use Aux > Print out in Setting mode to enable/disable the periodic printout on each
measurement channel.
• Scale printout and recording color printout (pen model) 7.7
Use Print > Scale in Basic Setting mode to turn scale printout On/Off.
Use Print > Pen color in Basic Setting mode to turn pen color printout On/Off (pen
model).
Tag printout • Select channel printout or tag printout 7.7
Use Print > CH/Tag in Basic Setting mode to select whether to use channel numbers
or tags in printouts.
• Set the tag 6.7
Use Aux > Tag in Setting mode to set the tag name.
Tag display In data display setup mode, select Screen No.>(thescreennumber)>Tag_1CH
digital display, Tag_2CH digital display, Tag_1CH digital + 1CH bargraph, or Tag_1CH
digital + 4CH bargraph.
8.2
Alarm occurrence/release printout
• Turn printout On/Off 7.7
Use Print > Alarm in Basic Setting mode to select whether to print the alarm
occurrence and release, print only the alarm occurrence, or not print.
• Time printout format 7.16
Use Personalize > Time print > Alarm in Basic Setting mode to set the time printout
format when printing alarm occurrence/release.
Recording Start Printout • Turn printout On/Off 7.7
Use Print > Record On in Basic Setting mode to enable/disable the recording start
printout.
• Time printout format 7.16
Use Personalize > Time print > RCD On in Basic Setting mode to set the time
printout format.
New chart speed printout • Turn printout On/Off 7.7
Use Print > Chart speed in Basic Setting mode to set whether to print the new chart
speed when the chart speed is changed.
• Time printout format 7.16
Use Personalize > Time print > C. Speed in Basic Setting mode to set the time
printout format.
Message printout • Set the message string 6.8
Use Aux > Message to set the message string to be printed.
• Time printout format 7.16
Use Personalize > Time print > Message in Basic Setting mode to set the time
printout format.
• Execute the message printout 3.10
Use Func > Message in Operation mode to execute the message printout.
Date format Use Date format > Type in Basic Setting mode to set the printout/display format of the
date.
7.19
SD memory card
(/EM1 option)
Use Data save in Setting mode to set how to start and stop data saving.
Use Aux>Data replay to configure the recorder settings for replaying saved data on a
chart paper using a dot model.
IM04P
01B01-
03E
1.10 Function Setup Guide