YOKOGAWA PH202S - Page 95

IM 12B07D02-01E
Appendix 10-9
1. Param. specific
2. Temp. specific
3. Cal. specific
4. Output function
4. Z2 setup
1. SV Meas.
2. SV Param.
3. Z1 setup
1. Temp. sens
2. Temp. unit
3. Temp. comp
1. mA funct.
2. Burn funct.
3. mA-table
1. Z1 Comp
2. Z1 Meas.
3. Z1 Err.lim
1. Z2 Comp
2. Z2 Meas.
3. Z2 Err.lim
1. Aspot
2. Zeropnt.
3. Aspot L
4. Aspot H
1. Slope
2. Slope L
3. Slope H
1. Z1 low
2. Z1 high
1. Z2 low
2. Z2 high
1. Aspot chk
2. Slope chk
1. Stab. time
2. Stab. val
1. Buf1 id
2. Buffer1 values
1. Buf2 id
2. Buffer2 values
1. Buf3 id
2. Buffer3 values
1. Change
2. Exit
1. Change
2. Exit
1. Change
2. Exit
1. Change
2. Exit
5. User interface
1. Maint. timer
1. Disp. res
2. Auto. Ret
3. Passcodes
1. Error prog.
2. Maintenance
3. Display
Err4.1···Err16
1. Maintenance
2. Commissioning
3. Service
Note:
“Z1” means impedance input1.
“Z2” means impedance input2.
Note:
“Stab.” means stability.
1. Model
2. Manufacturer
3. Distributor
4. Tag
5. Descriptor
6. Message
7. Date
8. Dev id
9. Write protect
Universal rev
Fld dev rev
Software rev
Hardware rev
Poll addr
Num req preams
5. Cal. Check
1. Stab. chk
2. Aspot
3. Slope
5. Buffers 1. Buffer 1
2. Buffer 2
3. Buffer 3
4. ITP
6. PV unit
0°C····80°C
0°C····80°C
0°C····80°C
5.Review
Buffer 4 name
Buffer 7 name
Buffer 9 name
4.Detailed setup
Level 6 menu
Level 1 menu Level 2 menu Level 3 menu Level 4 menu Level 5 menu
(Continued)