YOKOGAWA PT500 - 6. High gain multiplier (K1)

22-5
SM80B22M02E
６．High gain multiplier （Ｋ１）
（１） When you are displayed ” High Gain= #.# “on the data display ,then press ENTER
ENTERENTER
ENTER key.
The data display become under setting mode.
Setting range: from 10 to 50
（２） Press △
△△
△ +
++
+ or ▽
▽▽
▽ -
--
- key to alter the high gain multiplier .
Press
ENTER
ENTERENTER
ENTER key to set the value of the high gain multiplier .
The display of High gain multiplier is changed
1.0 ⇔ 1.1 ･････ 5.0 ⇔ 1.0 .
７．Low gain multiplier （Ｋ２）
（１） When you are displayed ” Low Gain= #.# “on the data display ,then press ENTER
ENTERENTER
ENTER key.
The data display become under setting mode.
Setting range: from 0.1 to 1.0
（２） Press △
△△
△ +
++
+ or ▽
▽▽
▽ -
--
- key to alter the Low gain multiplier .
Press
ENTER
ENTERENTER
ENTER key to set the value of the Low gain multiplier .
The display of Low gain multiplier is changed
0.1 ⇔ 0.2 ･････ 1.0 ⇔ 0.1.
Low Speed Gain
High Gain= #.#
Low Speed Gain
Low Gain= #.#