YOKOGAWA PT500 - Chapter 11 Input and Calculate the ship’s parameter (PT500 A)

11- 1
SM80B22M02E
Chapter 11 Input and Calculate the ship’s parameter (PT500A)
Input the following item for calculating the ship’s parameter
① Kind of vessels
② Length between perpendiculars (LPP)
③ Molded breadth (B-mld)
④ Designed full load draft (D-Full load)
⑤ Designed full load displacement (Full load displacement)
⑥ Block coefficient (Cb)
⑦ Area pf rudder (Ar)
⑧ Navigation speed (VS)
⑨ Ship’s maneuverability (T,K)
⑩ Display of the ship’s maneuverability
１． Select the ship’s parameter
(1) Press the ENTER
ENTERENTER
ENTER key after displayed " MAINTENANCE 10 … "on the data display.
The data display is displayed ship’s parameter mode.
(2) Press
△
△△
△ +
++
+ or ▽
▽▽
▽ -
--
- key to change the item.
①⇔②⇔③⇔④⇔⑤⇔⑥⇔⑦⇔⑧⇔⑨⇔⑩⇔①
① ⑦
② ⑧
③ ⑨
④ ⑩
⑤ ⑪
⑥
Press
ENTER
ENTERENTER
ENTER key after selected the item. The function of the item become valid mode .
SHIP PARA. CALC
…
SHIP'S Type= #
SHIP PARA. CALC
…
LPP= ###.##
SHIP PARA. CALC
…
B-mld= ##.##
SHIP PARA. CALC
…
D-Full= ##.##
SHIP PARA. CALC
…
Cb= #.####
SHIP PARA. CALC
…
Full Disp=######
SHIP PARA. CALC
…
Rud-Area=###.##
SHIP PARA. CALC
…
Speed= ##.#
SHIP PARA. CALC
…
CALCULATION
SHIP PARA. CALC
…
CALC PARA. DISP
SHIP PARA. CALC
…
<EXIT>