11-
5
SM80B22M02E
１．６
Input the Block coefficient (Cb)
Block coefficient means ship’s shape is whether slim or not.
For example
・
Ferry ,container ship
：
0.50
～
0.60
・
Bulk carrier, Tanker
：
0.65
～
0.75
・
VLCC, Large Bulk carrier
：
0.78
～
0.85
（１）
When you are displayed "
Cb= X.XXXX
" on the data display ,then press
ENTER
ENTERENTER
ENTER
key.
The data display become under setting mode.
←
Cursor position is inputting point
（２）
Press
△
△△
△
+
++
+
or
▽
▽▽
▽
-
--
-
key to set the cursor point. Then change the data by turning the Set
course dial. Turn to the clockwise direction , data is increased and turn to the counter
clockwise direction ,data is decreased. (Data is 0 to 9 Numerical value)
（３）
After input the Cb data , then press
ENTER
ENTERENTER
ENTER
key.
１．７
Input the Area pf rudder (Ar)
Unit of the area is
㎡
（１）
When you are displayed "
Rud-Area=XXX.XX
" on the data display ,then press
ENTER
ENTERENTER
ENTER
key.
The data display become under setting mode.
←
Cursor position is inputting point
（２）
Press
△
△△
△
+
++
+
or
▽
▽▽
▽
-
--
-
key to set the cursor point. Then change the data by turning the Set
course dial. Turn to the clockwise direction , data is increased and turn to the counter
clockwise direction ,data is decreased. (Data is 0 to 9 Numerical value)
（３）
After input the Ar data , then press
ENTER
ENTERENTER
ENTER
key.
To Next Page
Loading...