11-6
SM80B22M02E
１．８
Input the Navigation speed (
ＶＳ
)
（１）
When you are displayed "
Speed= ##.#
"
on the data display ,then press
ENTER
ENTERENTER
ENTER
key.
The data display become under setting mode.
←
Cursor position is inputting point
（２）
Press
△
△△
△
+
++
+
or
▽
▽▽
▽
-
--
-
key to set the cursor point. Then change the data by turning the Set
course dial. Turn to the clockwise direction , data is increased and turn to the counter
clockwise direction ,data is decreased. (Data is 0 to 9 Numerical value)
（３）
After input the VS data , then press
ENTER
ENTERENTER
ENTER
key.
１．９
Ship’s maneuverability (T,K)
（１）
When you are displayed "
CALCULATION
"on the data display ,then press
ENTER
ENTERENTER
ENTER
key.
Start the calculation of ship’s maneuverability.
（２）The data display become under mode.
（３）
Press
ENTER
ENTERENTER
ENTER
key. Then go to Display of the ship’s maneuverability
To Next Page
Loading...