YOKOGAWA PT500 - Chapter 16 Select the course after auto override steering

16-1
SM80B22M02E
Chapter 16 Select the course after auto override steering
In this function, course for auto steering after override steering can be selected either compass
Heading value at that time or set course value on set course display.
（１） Press the ENTER
ENTERENTER
ENTER key after displayed " MAINTENANCE 15… "(PT500A) or
" MAINTENANCE 13 … "(PT500D ･ SUBAUTO) on the data display.
Data display become current setting mode.
← Current setting item
（２） Change the setting mode by using the △
△△
△ +
++
+ or ▽
▽▽
▽ -
--
- Keys.
（３） If you want to change the selection of course after override steering , Press ENTER
ENTERENTER
ENTER key at when the
display is (1).
Data display become under setting mode.
← Current setting item
a....a means setting item
COMP. HEADING
： Set the compass heading as the course
SET COURSE
： Set the set course value as the course
（３） Press △
△△
△ +
++
+ or ▽
▽▽
▽ -
--
- key to alter the item COMP. HEADING ⇔ SET COURSE ⇔
COMP. HEADING
Press
ENTER
ENTERENTER
ENTER key to set the COMP HEADING or SET COURSE.
OVERRIDE COURSE
…
= aaaaaaaaaaaaa
OVERRIDE COURSE
< aaaaaaaaaaaaa
△
△△
△ ＋
＋＋
＋
△
△△
△ ＋
＋＋
＋
▽
▽▽
▽ －
－－
－
▽
▽▽
▽ －
－－
－
OVERRIDE COURSE
…
= aaaaaaaaaaaaa
OVERRIDE COURSE
…
<EXIT>