21-1
SM80B22M02E
Chapter 21 Analog recorder output for wide rudder angle mode
You can choose the following rudder angle mode
①
Normal rudder angle mode-1 (Steering angle:
±
35deg. Recorder out put :0 to 5VDC/
±
40deg.)
②
Normal rudder angle mode-2 (Steering angle:
±
35deg. Recorder out put: 0 to 5VDC/
±
45deg).
②
Normal rudder angle mode-3 (Steering angle:
±
35/45deg. Recorder out put: 0 to 5VDC/
±
45deg).
③
Wide rudder angle mode-1 (Steering angle:
±
35/70deg. Recorder out put :0 to 5VDC/
±
80deg).
④
Wide rudder angle mode-2 (Steering angle:
±
35/105deg. Recorder out put: 0 to 5VDC/
±
120deg).
（１）
Press the
ENTER
ENTERENTER
ENTER
key after displayed "
Option Set 3…
" on the data display.
Data display become current setting mode.
←
Current setting wide rudder angle mode
（２）
Select the rudder angle mode by using the
△
△△
△
+
++
+
or
▽
▽▽
▽
-
--
-
Key
（３）
If you want to change the setting data of Wide angle mode, Press
ENTER
ENTERENTER
ENTER
key at when the display is (1).
Data display become under setting mode.
←
Current setting mode
a.....a means setting item
Normal -1
：
Normal rudder angle mode-1
．．．
Recorder range
±
40deg.
Normal -2
：
Normal rudder angle mode-2
．．．
Recorder range
±
45deg
Normal -3
：
Normal rudder angle mode-3
．．．
Recorder range
±
45deg
Wide-1
：
Wide rudder angle mode-1
．．．
Recorder range
±
80deg
Wide-2
：
Wide rudder angle mode-2
．．．
Recorder range
±
120deg
（４）
Press
△
△△
△
+
++
+
or
▽
▽▽
▽
-
--
-
key to alter the item ,
Normal-1
⇔
⇔⇔
⇔
Normal-2
⇔
⇔⇔
⇔
Wide-1
⇔
⇔⇔
⇔
Wide-2
⇔
⇔⇔
⇔
Normal-1
Press
ENTER
ENTERENTER
ENTER
key to set the setting item.
To Next Page
Loading...