YOKOGAWA SC450G - Page 41

IM 12D08N05-01E
5-3
<5. MENU STRUCTURE COMMISSIONING>
Enter
Measurement setup
 Temperature settings
 Temp. Compensation
 Calibration settings
 Concentration
 Measure Conductivity only
Configure sensor
Conduct.+Concentr
Conductivity only
Resistivity only
Concentration only
NOTE
“Mainparameter”and/or“Measure”determinestherestoftheHMImenustructure
Menu Parameter Default values
Range
min. max.
CongureSensor Cell constant 0.1 cm
-1
0.005 cm
-1
50 cm
-1
Temp. Comp. Reference Temp. 25ºC,77ºF 0ºC, 32.0ºF 100ºC, 211ºF
Manual Comp. Manual Temp. 25ºC,77ºF -20ºC, -3.0ºF 250ºC, 482ºF
Temp. Coef T.C.methods 1 2.10%/ºC,1.17%/ºF -10%/ºC,0%/ºF 3.5%/ºC,2%/ºF
T.C.methods 2 2.10%/ºC,1.17%/ºF 0%/ºC,0%/ºF 3.5%/ºC,2%/ºF