YOKOGAWA SC450G - Page 43

IM 12D08N05-01E
5-5
<5. MENU STRUCTURE COMMISSIONING>
Concentration measurement is only possible if “measure” in the
“Configure sensor” menu is set to “conductivity + concentration”
or “Concentration only”.
Enter
Measurement setup
 Temperature settings
 Temp. Compensation
 Calibration settings
 Concentration
 Measure Conductivity only
Configure sensor
Menu Parameter Default values
Range
min. max.
Calibration Air adjust 10.00μS 0μS 20μS
c.c. high 120% 100% 120%
c.c. low
80% 80% 100%
Stabilization time 5 s 2 s 30 s
Calib. interval 250 days 1 day 250 days
Concentr. Table Table See appendix