YOKOGAWA SC450G - Page 77

IM 12D08N05-01E
APP-11
<APPENDIXES>
Online menu Level 1 menu Level 2 menu Level 3 menu Level 4 menu
Commissioning Measurement setup Meas
Congure
sensor
Sensor type
Meas unit
Fact CC
Measure*
Temp settings Temp sensor
Temp unit
Temp
compensation
Temp comp
Man value*
Ref temp
Method SC1
TC SC1*
Matrix SC1*
Method SC2*
TC SC2*
Matrix SC2*
Calib. settings Air adjust limit
cc hi limit
cc lo limit
Stab time
cal interval
Concentration
Additional table*
Conc table unit*
Output setup mA1 setup
mA2 setup
(similar to mA1)
Type = control func
Process parameter
PID SP
PID Rng
PID dir
PID MR*
PID I-time*
PID D-time*
Burn
Expiry time
Type = output func
Process parameter
Lin0%*
Lin100%*
Burn
Damping time
Type = simulate func
Sim. Perc.
Type = Off
S1 setup
S2 setup
(similar to S1)
S3 setup
(similar to S1)
S4 setup
(similar to S1)
Type = control func
Process parameter
Expiry time
PID SP
PID Rng
PID dir
PID MR*
PID I-time*
PID D-time*
Analog output
DC period time*
max. pulse freq.*
Type = fail func
Type = alarm func
Process parameter
alarm SP
alarm dir.
alarm hyst.
alarm delay
expiry time
Type = simulate func
on/off*
percentage*
Type = hold func
Type = Off
HOLD setup HOLD L/F
mA1xed*
mA2xed*
Hold during cal
Input contact Congure
Input contact