IM 12D03D02-01E
1-9
1. Outline
1.7 Options (Available Separately)
The following options are available for the Personal Conductivity Meter for your
convenience. When ordering, specify part number shown below.
NaCl Standard solution
(Part no.: K9221ZA)
0.1mol/L NaCl solution for
calibration (250mL)
F010701.ai
1.8 Spare Parts
O-rings and gaskets are important parts to ensure that the SC72 meter is water
resistant. Replace these parts as required. Refer to Section 5.5, “Storage and O-ring/
Gasket Replacement” for replacement.
O-ring and gasket set
(Part no.: K9654AY)
2 gaskets for battery box
2 O-rings for connector
F010801.ai
To Next Page
Loading...
