YOKOGAWA SC72 - Page 40

IM 12D03D02-01E
4-13
4. Keypad and Display Functions
(11) Set beep on/o󰀨 (bZ.o) panel
The beep sound on key press can be enabled/disabled in this panel. Use keys
to select on or o󰀨 and press
F/ENT
key to conrm. Note that this beep setting does
not a󰀨ect the alarm sounding (see Item (9)).
F/ENT
to turn ON (enable).
F/ENT
to turn OFF (disable).
F/ENT
(12) Set measurement unit (SC.U) panel
Toggle the measurement value units between [S/cm] and [S/m].
Use the
keys to toggle the measurement value units. Then press the
F/ENT
key to complete setting.
to toggle
F/ENT
to set
F/ENT
(13) Set temperature unit (tP.U) panel
Used to select the temperature unit: Celsius (°C) or Fahrenheit (°F).
Use
keys to select the desired temperature unit and press
F/ENT
key to
conrm.
to toggle
F/ENT
to set
F/ENT