The cooling fan unit is added to the standard type control unit so that the control unit works in
wider range of ambient environments (-20 to 70 deg. C).
Fan unit
Power input
terminal
Power supply unit
for fan unit
Grounding
terminal
Cable tray
Empty (1 UNIT) (*1)
Node fan unit (2 UNIT) (*1)
Utility unit (1 UNIT) (*1)
External interface unit (*1)
Base unit (5 UNIT) (*1)
*1: 1 UNIT=44.45 mm
Processor
module
Power supply module
Such as Input/Output module
Figure 1.1-6 Configuration of Safety Control Unit for Vnet/IP (SSC60D-F)
Table 1.1-6 Model Names of Safety Control Unit for Vnet/IP Components (Wide Range Temperature
T
ype)
Name
Wide range temperature type safety control unit
for Vnet/IP
Single configuration
(SSC60S-F)
Duplexed configuration
(SSC60D-F)
Power supply module (100-120 V AC) SPW481 2pcs SPW481 2pcs
Power supply module (220-240 V AC) SPW482 2pcs SPW482 2pcs
Power supply module (24 V DC) SPW484 2pcs SPW484 2pcs
Processor module SCP461 1pcs SCP461 2pcs
Dummy cover (for processor module) (*1) T9083VB 1pcs - -
Dummy cover (for I/O module) (*2) SDCV01 as required SDCV01 as required
ESB bus coupler module (*3)
SEC402/
SEC401
2pcs
SEC402/
SEC401
2pcs
External interface unit (for wide range temperature
type safety control unit)
- 1pcs - 1pcs
Power supply unit for fan unit (100-120/220-240 V
AC)
S9159FA 2pcs S9159FA 2pcs
Power supply unit for fan unit (24 V DC) S9160FA 2pcs S9160FA 2pcs
Fan unit AIP602 2pcs AIP602 2pcs
*1: For non-redundant configuration, used to cover the slot at right-hand side of the single processor module.
*2:
Used to cover the empty I/O module slot.
*3: SEC402 or SEC401 is required for connecting the safety node units.
<1.1 Configuration of Safety Control Unit > 1-8
IM 32Q06C10-31E 4th Edition : Jan.30,2015-00
To Next Page
Loading...
