YOKOGAWA ZR802G - Instrument Check

<Start-up and Safety Precautions>
1-7
IM 11M12G01-01Z1 1st Edition : Mar. 08, 2021-00
1.1 Instrument Check
Upon delivery, unpack the instrument carefully and inspect it to ensure that it was not damaged
during shipment. If damage is found, retain the original packing materials (including the outer
box) and then immediately notify the carrier and the relevant Yokogawa sales o󰀩ce.
n Checking the model and su󰀩x code
Make sure the model and su󰀩x code on the nameplate a󰀩xed to the left side of the housing.
Model and su󰀩x code is shown in Table 3.
n Checking accessories
The instrument is shipped with standard accessories. Optional accessories are sold separately if
necessary. Make sure the accessories in Table 1 or Table 2 are included.
Table 1 Standard accessories
Iten Q'ty Parts No. Description
Fuse
1 A1113EF -
Mounting bracket (standard)
1 F9800AP -
Bolt for mounting bracket
4 - M6x10 mm
Washer for mounting bracket
4 - for M6
Bolt for pipe mounting
4 - M6x70 mm
Screws for pipe mounting
2 - M6x100 mm
Tag label (standard)
1 - (Note)
(Note) Tag label is included when su󰀩x code except for /SCT is specied.
A blank label is included when no TAGNO. is specied.
Select mounting bracket by option code of specications.
Table 2 Mounting bracket by specications
Item Q'ty Parts No. Description
Wall mounting Bracket for ZR402G replacement
1 F9800ZA
/BR
Bracket for ZR402G replacement (heavy duty coating)
1 F9800ZC
/BR, /RC
Mounting bracket (haevy duty coating)
1 F9800AR
/RC