Need help?Do you have a question about the Yokomo RO1.0 and is the answer not in the manual?
General| Scale | 1/10 |
|---|---|
| ESC | Not included |
| Wheelbase | 257mm |
| Motor | 540 size (not included) |
| Battery | Not included |
| Body | Not included |
| Suspension | 4-wheel independent suspension |
General safety guidelines for assembling the RC car.
Safety guidelines for operating the RC car.
Precautions for handling and charging batteries.
Precautions for handling and maintaining the motor.
Lists additional items needed for operation.
Lists tools necessary for assembly.
Lists tools provided with the kit.
Steps for assembling the bellcrank components.
Steps for attaching the bellcrank to the chassis.
Steps for installing the bulkhead.
Steps for assembling the rear suspension arms.
Steps for attaching the rear suspension arms.
Steps for assembling the rear shock tower.
Steps for assembling the gear differential.
Initial steps for assembling the gearbox.
Continued steps for assembling the gearbox.
Steps for installing the motor plate and slipper.
Steps for installing the gearbox and driveshafts.
Steps for installing the rear upper rod.
Steps for installing the battery holder.
Steps for assembling the steering blocks.
Initial steps for installing front suspension arms.
Further steps for installing front suspension arms.
Steps for assembling front and rear shock absorbers.
Filling and sealing shock absorbers.
Steps to attach shocks to the chassis.
Steps for mounting the servo and servo saver.
Steps for mounting receiver and speed controller.
Steps for installing the motor and setting gear mesh.
Steps for placing the battery in the chassis.
Steps for gluing and mounting tires onto wheels.
Steps for painting and mounting the body and wing.
Information on registering for user benefits.
To Next Page
