York CZF024 THRU 060 - Cooling Capacity - With Air Handler Coils (Continued)

567175-YTG-E-0512
6 Johnson Controls Unitary Products
— = Not applicable.
MA Modular Air Handlers use Coil Only Ratings.
CZF04813(C)
AHE48D 24 – 1600 45.0 33.2 15.00 12.50
AHE60D 24 – 1565 45.5 33.8 15.50 13.00
AHP48 24 – 1600 45.0 32.2 13.75 12.00
AHP60 24 – 1600 46.0 32.8 14.50 12.50
AHR48D 24 – 1610 45.5 32.6 13.75 12.00
AHR60D 24 – 1620 45.5 32.8 14.00 12.25
AHX48 24 – 1660 46.0 34.4 15.25 12.75
AHX60 24 – 1570 46.0 33.8 15.50 13.00
AV*48 24 – 1625 45.5 33.6 15.25 12.50
AV*60 24 – 1560 45.5 33.8 15.50 12.75
F6FP048 24 – 1625 45.5 33.6 15.00 12.50
F6FP060 24 – 1570 46.0 33.8 15.50 13.00
F4FV060 24 – 1600 45.0 33.6 15.00 12.50
MV16C 21 FC/MC48C 1625 45.0 33.0 14.50 12.50
MV20D 24 FC/MC48D 1620 45.0 33.2 14.75 12.75
MV16C 21 FC/PC60C 1600 44.5 32.8 14.00 11.75
MV20D 24 FC/MC60D 1600 45.0 33.2 15.00 12.50
MV20D 24 FC/MC62D 1630 45.5 33.8 15.50 12.75
MV20D 24 FC64D 1630 47.0 35.8 16.00 13.25
MX16C 21 FC/MC48C 1685 45.0 34.0 14.50 12.50
MX20D 24 FC/MC48D 1525 45.0 33.2 14.75 13.00
MX16C 21 FC/PC60C 1630 45.0 33.0 14.50 13.00
MX20D 24 FC/MC62D 1605 46.0 34.0 15.75 13.25
MX20D 24 FC64D 1605 47.0 36.0 16.50 13.50
CZF06013(C)
AHE60D 24 – 1835 53.5 38.0 15.25 13.00
AHR60D 24 – 1870 52.0 36.2 13.75 12.00
AHX60 24 – 1865 53.5 38.5 15.40 13.00
AV*60 24 – 1730 52.5 36.4 15.25 12.75
F6FP060 24 – 1865 53.5 38.5 15.40 13.00
MV20D 24 FC/MC60D 1845 53.0 37.3 15.00 12.75
MV20D 24 FC/MC62D 1855 53.5 38.0 15.00 12.75
MV20D 24 FC64D 1705 54.5 39.0 16.00 13.50
MX20D 24 FC/MC60D 1780 53.0 37.5 15.50 13.00
MX20D 24 FC/MC62D 1795 54.0 38.5 15.75 13.25
MX20D 24 FC64D 1795 55.0 40.0 16.25 13.50
Rated in accordance with DOE test procedures (Federal Register 12-27-79 and 3-18-88) and AHRI Standard 210/240.
Cooling MBH based on 8°F entering air temperature, 50% RH (Relative Humidity), and rated air flow.
EER (Energy Efficiency Ratio) is the total cooling output in BTUs at 95 °F outdoor ambient divided by the total electric power in watt-hours at those conditions.
SEER (Seasonal Energy Efficiency Ratio) is the total cooling output in BTUs during a normal annual usage period for cooling divided by the total electric power
input in watt-hours during the same period.
1. MC coils available with a factory installed horizontal drain pan. See price pages for specific model number.
COOLING CAPACITY - With Air Handler Coils (Continued)
UNIT
MODEL
AIR HANDLER
COIL MODEL
1
COOLING
MODEL WIDTH
RATED
CFM
NET MBH
SEER EER
TOTAL SENS.
16 SEER AC WITH AIR HANDLERS