York MCC-MCH 09 - Remote Control Receiving Type Setting

YORK MINISPLIT FLOOR/CEILING Code 035T80012-000
10 FLOOR/CEILING
Notes
1. Default remote control receiving type setting is type-A.
2. Default remote control transmission type setting is type-A.
3. Remote control receiving type must be correct to Remote control transmission type.
4. Setting Remote control Transmission type see the Owner’s manual.
Switch No. Setting Remote Control receive
SW1 8
HA
LB
Preparation Before Installation (continued)
02_install.p65 19/4/02, 14:4510