York R123 - Page 43

FORM 160.55-O1 (604)
43
YORK INTERNATIONAL
Allows the user to set a period of time for which the
pulldown demand limit will be in effect after the chiller
starts.
Full Load Amps
Access Level Required: SER VICE
DeÞ ne the maximum amps at which the motor can op-
er ate. This value is viewable when logged in under the
Operator or View access level. Service Technicians re fer
to YORK Service Manual 160.55-M1.
Supply Voltage Range
Access Level Required: SERVICE
Allows the user to select a speciÞ c voltage range for volt-
age checking. When not disabled, this line voltage range
is used to determine a low line and high line volt age
threshold for initiating a shutdown. Service Tech ni cians
refer to YORK Service Manual 160.55-M1.
Current Unbalance Check (Enabled / Dis abled)
Access Level Re quired: SER VICE
Allows the user to control whether the logic checks for
current unbalance and initiates a shutdown as a result.
Service Technicians refer to YORK Service Manual
160.55-M1.
NAVIGATION
Home
Access Level Re quired: VIEW
Causes an instant return to the Home Screen.
2