84 YORK INTERNATIONAL
LD02102
OPTIONAL DECORATIVE TAMPERPROOF
ENCLOSURE (LOUVERED & WIRE GRILLE)
General
A combination louvered and wire grille enclosure is avail-
able for the chiller for the prime purpose of deterring un-
authorized access to components of the chiller.
Kit 475-04559-002 is the decorative/tamperproof enclo-
sure which consists of a combination of louvered sheet
metal panels and weather resistant wire grilles along with
mounting hardware. This kit has a further purpose of pre-
senting a pleasing appearance to the chiller when it is
located in a highly visible area.
Installation
1. Refer to Fig. 37 and the associated parts list. Before
starting installation, all of the items in the kit should
be identified by comparing with Fig. 37.
2. All holes for mounting kit parts are provided in both
the chiller frame and the added supports; therefore,
it should be unnecessary to drill holes.
3. Install the louvered panels and wire grilles using the
proper hardware and supports. Refer to Fig. 37 and
the Parts List for placement of the grilles/panels and
the proper hardware required. Discard existing grilles
to attach the louvered panels where necessary.
4. Notch grilles to suit water connection and wiring har-
nesses as needed.
5. If the High Ambient Sunshield Kit or Disconnect Op-
tion is installed, field adaption will be required where
parts of the kits interfere. Touch up exposed metal
parts to prevent rust.
NOTES:
1. Notch grilles to suit water connections and wiring harnesses.
2. Discard existing grilles to attach louver panels where necessary.
FIG. 37 LOUVERED AND WIRE GRILLE INSTALLATION
Parts List
PART # ITEM QUAN. DESCRIPTION
075-02563-002 1 4 Panel, Louvers Side Top
075-02563-005 2 2 Panel, Louvers Rear Top
075-02563-015 3 1 Panel, Louvers Front Top R.H.
075-02563-016 4 1 Panel, Louvers Front Top L.H.
075-02563-017 5 1 Panel, Louvers Front Top
075-02501-000 6 5 Bracket
075-02502-000 7 12 Clip, Retainer
075-02503-000 8 2 Clip, Retainer
026-31634-000 9 4 Grille, Side Btm.
026-32206-000 10 1 Grille, Rear Btm.
026-32207-000 11 1 Grille, Front Btm.
021-16205-000 51 28 Screw, Cap Hex 3/8-16 x 1/2
021-16158-000 52 28 Lock Washer Spg. 3/8
021-16139-000 53 28 Nut, Hex 3/8
021-16136-000 54 54 Screw, Tap Cut 1/4 x 1/2
021-16161-000 55 6 Screw, Cap Hex 1/4-20 x 3/4
021-16210-000 56 6 Lock Washer Spg. 1/4
021-16151-000 57 6 Nut, Hex 1/4
021-16203-000 58 49 Screw, Tap Type F 1/4 x 3/4 Lg.
021-16165-000 59 49 Washer, Flat 1/4
To Next Page
Loading...
