To Next PageTo Next Page
Need help?Do you have a question about the York YAKN09BZNWEUH1 and is the answer not in the manual?
General| Brand | York |
|---|---|
| Model | YAKN09BZNWEUH1 |
| Category | Air Conditioner |
| Language | English |
Highlights severe risks of injury or death from product modification.
Covers significant risks to persons or property from unsafe practices.
Addresses minor risks to personal safety or property damage.
Details and visual representation of the indoor air conditioning unit.
Details and visual representation of the outdoor air conditioning unit.
Information on using wired and wireless remote controllers.
Explains the 3 and 5-minute delay features for compressor protection.
Describes fan operation, heating capacity, defrosting, and cold air prevention.
Covers residual air expulsion and auto-restart after power loss.
Guidance on initial checks and reporting problems to support.
Addresses issues like lack of operation or insufficient cooling/heating.
Identification of sounds and smells that are not indicative of a fault.
Visualizes the flow of refrigerant through the system components.
Illustrates the electrical connections for the unit.
Warnings about risks from improper installation, parts, and environment.
Requirements for safe electrical work and proper grounding.
Precautions for handling refrigerant and preventing leaks.
Advice on choosing installation locations to avoid hazards.
List of tools needed for the installation process.
General introduction to the indoor unit installation process.
Steps for checking the unit after unpacking.
Detailed steps for securely mounting suspension bolts.
Guidelines for positioning refrigerant pipes and drain lines.
Instructions for physically attaching the indoor unit.
How to ensure the indoor unit is correctly leveled.
Procedure for connecting air ducts to the indoor unit.
Critical warnings regarding refrigerant use, mixing gases, and testing.
Guidelines for selecting appropriate copper pipes.
Step-by-step instructions for joining pipe sections.
Instructions for installing and ensuring proper function of drain piping.
Warnings about connecting drains to sewage and hose integrity.
Method for testing the drain system's performance.
Initial checks and wire management for electrical connections.
Notes on neatness, wire security, and avoiding damage.
Critical safety advice regarding fuses and shock hazards.
Explanation of how to modify the static pressure settings.
Method for adjusting static pressure on AC motor models.
Procedure for adjusting static pressure on DC motor models via remote.
Guidance on choosing the best location for the outdoor unit.
Steps for physically installing and connecting the outdoor unit.
Instructions for creating a correct flare on copper tubing.
Detailed steps for connecting the refrigerant pipes between units.
Explanation of why and how to insulate refrigerant tubes.
Method for taping and securing refrigerant pipes and drain hoses.
Final step to seal openings where pipes pass through walls.
Essential checks before operating the system, including electrical safety.
Detailed steps for evacuating the system using a vacuum pump.
Procedure for checking refrigerant lines for leaks.
Steps for tidying up the installed piping.
Guidance for conducting the initial test of the unit's operation.
Crucial safety requirements for electrical installation, including ELB usage.
Step-by-step guide for completing the electrical installation.
Information and tables for choosing appropriate wire sizes.
Instructions for environmentally safe disposal and recycling of the unit.
