York YCUL0016 - Dimensions - YCUL0030 - YCUL0036 (English)

YORK INTERNATIONAL
64
YORK INTERNATIONAL
65
FORM 150.63-EG1
Dimensions - YCUL0030 - YCUL0036 (English)
NOTE:
Placement on a level surface of free of obstructions (including snow, for winter operation) or air circulation ensures rated performance, reli-
able operation, and ease of maintenance. Site restrictions may compromise minimum clearances indicated below, resulting in unpredictable
airow patterns and possible diminished performance. YORK’s unit controls will optimize operation without nuisance high-pressure safety
cutouts; however, the system designer must consider potential performance degradation. Access to the unit control center assumes the unit
is no higher than on spring isolators. Recommended minimum clearances: Side to wall – 6'; rear to wall – 6'; control panel to end wall – 4';
top – no obstructions allowed; distance between adjacent units – 10'. No more than one adjacent wall may be higher than the unit.
LD04421























MODEL
YCUL
A B
0030 16 5/16” 28 7/8”
0036 14 1/2” 22 1/4”