JOHNSON CONTROLS
51
SECTION 5 – TECHNICAL DATA
Form 150.63-NM9
Issue date: 5/20/2021
5
23 Optional compressor manual motors starters (standard on CE units).
24 See sheet 3 of connection diagram for power input options.
25 Alternate connections shown for dierent two speed motor types.
26 Only tted on systems with a maximum of 4 fans.
27 220/230V units require a separate fuse for units w/4 or more fans beforesystem.
28 Low ambient kit -FSC for fan -MF1 is only tted on systems with less than 4 fans.
29
30
31 Input dual point circuit breaker option replaces input terminal block.
32 Field installed on remote evaporator units.
33 Fitted on units with single phase motors only
34 Fitted on units with low ambient option only
35 Only tted on units with an acoustic kit
36 Only tted on heat recovery units
37 Only tted on condensing units
38 Omitted on condensing units
Electrical notes and legend (cont’d)
035-21966-101 REVG