JOHNSON CONTROLS
93
SECTION 5 – TECHNICAL DATA
Form 150.63-NM9
Issue date: 5/20/2021
5
Weight distribution and isolator mounting positions
General
Weights of specific chiller models vary significantly as
options are added. As a result, total weights, weights at
individual isolator positions, and actual isolator selec-
tion at each position cannot be published due to the
vast number of possible combinations. This informa-
tion will be available when the specific chiller/ option
selection is made from the local Johnson Controls sales
office. Be aware, weights will change with each op-
tion along with possible isolator changes. Weights and
isolators may need to be recalculated when the option
selections are changed.
Whenever the isolator option is ordered, the isolators
will be shipped loose with the chiller. Packed with
the isolators and also in the control panel informa-
tion packet is a drawing and table specifically for each
chiller, based on the option selection. The drawing and
table will be similar to the sample shown below. The
drawing will show the isolator locations along with the
weight in pounds and kilograms at the specific loca-
tion, isolator position, and location measurements for
each isolator.
Order No: 082533060301
Line No: 1
Product: YCUL
Model: YCUL0045EE46XEA
Voltage: 46
Unit shipping
weight
(Display on unit
data nameplate)
kg lb
1334.5 2942
0
Control Panel
0
R1 R2
L1 L2
X
Y
Top View
LD13276
Location
X distance,
in. (mm)
Y distance,
in. (mm)
Vendor number
Operating weight,
lb (kg)
R1 9.8 (248.9) 1.1 (27.9) ND-D / Yellow 1312 (595.1)
L1 9.8 (248.9) 89.5 (2273.2) ND-DS / Yellow 1843 (836.0)
R2 135 (3429) 1.1 (27.9) ND-D / Yellow 1280 (580.6)
L2 135 (3429) 89.5 (2273.2) ND-DS / Yellow 1793 (813.3)
SAMPLE PRINTOUT SUPPLIED IN THE ISOLATOR PACKAGE AND IN THE CHILLER PANEL LITERATURE PACKET.
Figure 31 - Sample Isolator Location Drawing
To Next Page
Loading...
