York YLAA0180 - Determining Proper Oil Levels; Table 12 - OIL LEVELS IN TANDEM SETS; Table 13 - OIL LEVELS IN TRIO SETS

JOHNSON CONTROLS
100
FORM 150.72-ICOM7
ISSUE DATE: 10/22/2020
SECTION 6 – COMMISSIONING
Determining Proper Oil Levels
The following chart lists the proper oil levels in tandem
and trio compressor manifold sets.
TABLE 12 - OIL LEVELS IN TANDEM SETS
TANDEM
COMPRESSOR
COMPRESSOR
STATUS
OIL LEVEL
1 on 1/8 to full SG
2 on Bottom of SG
1 o󰀨 Bottom of SG
2 on 1/8 to full SG
1 on 1/8 to full SG
2 o󰀨 Bottom of SG
TABLE 13 - OIL LEVELS IN TRIO SETS
TRIO
COMPRESSOR
COMPRESSOR
STATUS
OIL LEVEL
1 on 1/8 to full SG
2 on Bottom of SG
3 on 1/8 to full SG
1 on 1/8 to full SG
2 o󰀨 Bottom of SG
3 on 1/8 to full SG
1 o󰀨 Bottom of SG
2 on Bottom of SG
3 on 1/8 to full SG
1 on 1/8 to full SG
2 on Bottom of SG
3 o󰀨 Bottom of SG
1 on 1/8 to full SG
2 o󰀨 Bottom of SG
3 o󰀨 Bottom of SG
1 o󰀨 Bottom of SG
2 o󰀨 Bottom of SG
3 on 1/8 to full SG
1 o󰀨 Bottom of SG
2 on 1/8 to full SG
3 o󰀨 Bottom of SG
1 2
LD29440
FIGURE 26 - TANDEM SET
123
LD29441
FIGURE 27 - TRIO SET