FORM NO.:6U6K-B01E-NB-EN
JOHNSON CONTROLS
30
SECTION 3 – HANDLING AND STORAGE
Notes
1.Dragging plates and anticollision plates are only used during container transport;
2.Forklift holes are for in-plant transfer;
3.Four rigging plates are installed before delivery.
FIGURE 15 – RIGGING PLATES YMAA/YMPA0160-0260
Rigging Plate
(Factory-Mounted)
Dragging Plate
(Factory-Mounted)
Anticollision Plate
(Factory-Mounted)
Forklift Hole
Cooke Industries - Phone: +64 9 579 2185 Email: sales@cookeindustries.co.nz Web: www.cookeindustries.co.nz
To Next Page
Loading...
