York YST - Page 108

JOHNSON CONTROLS
108
FORM 160.67-O1
ISSUE DATE: 4/1/2015
SECTION 2 - OPTIVIEW CONTROL CENTER INTRODUCTION
Setpoints
Access Level Required: VIEW
Causes an instant return to the Setpoints Screen.
Configuration Setpoints
Access Level Required: VIEW
Causes an instant return to the Configuration Setpoints
Screen 1.
Pressure Setpoints
Access Level Required: VIEW
Moves to a sub-screen that allows programming of
various pressure thresholds pertaining to the operation
of the chiller.
Speed Setpoints
Access Level Required: VIEW
Moves to a sub-screen that allows programming of
various speed thresholds pertaining to the operation of
the chiller.
Ramp Rate Setpoints
Access Level Required: VIEW
Moves to a sub-screen that allows programming of var-
ious speed setpoint and valve control signal ramp rates
pertaining to the operation of the chiller.