Need help?Do you have a question about the YORKVILLE BASS MASTER 200T and is the answer not in the manual?
General| Brand | YORKVILLE |
|---|---|
| Model | BASS MASTER 200T |
| Category | Musical Instrument Amplifier |
| Language | English |
Manual should be read and understood before operating the unit. Save for future reference.
Keep the box and packaging materials in case the unit needs to be returned for service.
Connect unit to specified voltage; use polarized plug correctly. Avoid defeating grounding.
Do not place on unstable surfaces, expose to liquids or open flames. Use manufacturer-recommended accessories.
Route power cord safely. Do not operate the unit if the cord is damaged.
The unit should only be serviced by qualified service personnel.
Prevents audible power amplifier clipping by reducing signal before it occurs.
Attenuates midrange frequencies and boosts a band of high frequencies.
Sets the desired level of sound output for the amplifier.
Four overlapping controls that adjust the entire audio frequency band.
Provides an effects loop to connect external processors to the amplifier.
Post-effects output that minimizes hum when connecting to external devices.
Disconnects internal speaker when headphones are plugged into the PHONES jack.
Allows connection of an external speaker cabinet with minimum 4 Ohms impedance.
Technical details including power output, sensitivity, hum and noise, and DC offset.
To Next Page
