To Next PageTo Next Page
Need help?Do you have a question about the YORKVILLE LS801P and is the answer not in the manual?
General| Type | Active Subwoofer |
|---|---|
| Power Output | 800W RMS |
| Program Power | 1600W |
| Driver Size | 18 inches |
| Input Sensitivity | +4dBu |
| Phase Switch | 0 / 180 degrees |
| Inputs | XLR, 1/4 inch |
| Outputs | XLR |
| Input Impedance | 10k ohms |
| Enclosure Material | Birch Plywood |
| Dimensions (H x W x D) | 24 x 21 x 23 inches (61 x 53.3 x 58.4 cm) |
Covers warnings about electric shock, fire hazards, water exposure, and general usage.
Lists numbered safety instructions for operation and maintenance as per UL60065 standards.
Explains setup options for stereo active and passive speaker configurations.
Details controls for adjusting output level, sound shape, and high-frequency rolloff.
Illustrates input gain, boost stages, RMS detection, and peak limit detection circuits.
Depicts the rolloff frequency adjustment and the signal flow through processing stages.
Shows the woofer amplifier section, driver chip supply, and associated power components.
Details the electronic circuits responsible for limiting output and providing protection.
Provides a schematic of the internal power supply unit and its connections.
Illustrates the electronic circuit for generating the triangle waveform.
Lists significant changes and updates made to the product over its development history.
Maps specific controls on the unit to their corresponding part numbers and knob types.
