YORKVILLE Synergy SA153 User Manual

SERVICE MANUAL
Synergy SA153
SMT Disclaimer
Due to the complex nature of the use of SMT installed components
in Yorkville equipment, we highly caution all service technicians in
attempting to repair or replace SMT factory installed components.
Many of these components may be glued prior to initial soldering.
Replacing SMT components requires expensive
specialized de-soldering equipment and training.
Yorkville Sound will repair and replace defective SMT components
to ensure proper quality assurance and installation is maintained.
U.S.A.
Yorkville Sound Inc.
4625 Witmer Industrial Estate
Niagara Falls, New York
14305, USA
Voice: 716-297-2920
Fax: 716-297-3689
WORLD HEADQUARTERS
CANADA
Yorkville Sound Limited
550 Granite Court
Pickering, Ontario
L1W 3Y8 CANADA
Voice: 905-837-8481
Fax: 905-837-8746
SA153
Manual-Service-SA153-00-1v0 • May 20, 2021

YORKVILLE Synergy SA153 Specifications

General

Active or Passive	Active
Inputs	XLR, Combi-Jack
Type	Active
Program Power (Watts)	1000W
LF Driver(s)	15 inch Ceramic Magnet Woofer
Input Impedance (Balanced/Unbalanced)	10kΩ / 20kΩ
Limiter	Yes
Enclosure Material	Plywood
Grille	Steel
Optional Accessories	Speaker Stand
HF Driver(s)	1 inch Throat Compression Driver
Tweeter	1 inch Throat Compression Driver
Midrange Driver(s)	6.5 inch Neodymium Magnet Midrange
Midrange	6.5 inch Neodymium Magnet Midrange