11. Do not use the Diffuser for other purposes that are not described in this Instruction Manual.
＜Product Details＞
Diffuser Size (Round Glass Nebulizer and Glass Top all assembled) : 120mm (diameter) x 150mm (height)
Power Supply : AC100-240V 50-60Hz AC Adapter : DC12V 200mA (Code : approx. 1.5m)
Power Consumption : 3W Diffusing area : 9 ㎡~37 ㎡ Unit Material : Rubberwood Made in Taiwan
＜Product Maintenance＞
When the LED lamp is on and the oil mist forms inside the Round Glass Nebulizer, the unit is working properly. If it's not working as
suggested, please refer to the following potential problems and how to troubleshoot.
〇 The unit cannot be turned on.
Make sure that the power - adapter is plugged into a wall socket.
The Round Glass Nebulizer should be firmly attached to the product body.
Make sure the Timer Switch is not turned off.
〇 No smell or little smell. / LED Lamp cannot be turned on.
Round Glass Nebulizer may need cleaning. Refer to the cleaning instructions explained above. If cleaning the Nebulizer did not solve
the problem, the Injector may be clogged. Please replace the Round Glass Nebulizer with a new one.
If the problem persists or there are issues with the use of the Diffuser , please contact Young Living Japan Inc. at this email address:
younglivingjapan@youngliving.com.
If the Diffuser is found to be defective, a refund will be effected for you.
To Previous Page
Loading...
