Need help?Do you have a question about the Young 85000 and is the answer not in the manual?
General| Brand | Young |
|---|---|
| Model | 85000 |
| Category | Measuring Instruments |
| Language | English |
Details range, resolution, and accuracy for wind speed and direction.
Describes available serial output types, formats, and baud rates.
Covers polar and Cartesian voltage output scales and ranges.
Includes output rate, power supply, dimensions, and weight.
Details the default serial output format and analog voltage outputs.
Guidance on checking sensor response using a Wind Tracker display.
Recommendations for optimal sensor location to avoid interference.
Details on mounting the sensor to a pipe and aligning it to north.
Information on power supply requirements and cable resistance.
How to connect and use the sensor with a Young Wind Tracker display.
Details on analog voltage outputs and their connection to data loggers.
Overview of various serial output options like RMYT, ASCII, NMEA, and SDI-12.
Techniques to reduce current consumption for low-power applications.
Recommended method for checking and changing sensor settings.
Using programs like HyperTerminal for serial communication setup.
How to list commands, report settings, and enter operate mode.
Explains commands for setting output mode, format, baud rate, and parameters.
Example configuration for minimum power with voltage output.
Example configuration for minimum power with RS-232 ASCII output.
Example configuration for minimum power with RS-232 polled ASCII.
Example of RS-232 polled ASCII output configuration.
Example configuration for SDI-12 continuous output.
Example configuration for SDI-12 standby output.
Diagram and instructions for connecting the 85000 to a Young 06201 Wind Tracker.
Diagram and instructions for connecting the 85000 to a Young 06206 Marine Wind Tracker.
Diagram and instructions for connecting the 85000 to a voltage measuring device.
Diagram and instructions for connecting the 85000 to an RS-232 device.
Diagram and instructions for connecting the 85000 to an RS-485 device.
Illustrates polar and Cartesian wind direction representation.
Shows mounting details, pipe size, and overall sensor dimensions.
To Next Page