9-9
Command Description.
For quick reference, the communications commands are divided into
five functional groups: process, report database, database management, control and report
system information. For details on process commands, see "Remote Control Commands", later
in this section.
PROCESS
PC Process calibration
PS1 Process sample from calibration well (Station #1)
PS2 Process sample from test tube holder (Station #2)
PS4 Process turntable batch (Station #4)
PS5 Process monitor sample (Station #5)
REPORT DATABASE
RC Report calibration result
RS Report sample result
RS# Report sample result with sample ID number
RY Report status of instrument
RX Report last transmission
DATABASE MANAGEMENT
RZ Clear database memory
CONTROL
TR0 Turn remote control off
TR1 Turn remote control on
TP0 Turn 2700 printer off
TP1 Turn 2700 printer on
MPt Change pump purge time
MTt Change monitor time interval
MRt Change precal time interval
MOt Change postcal time interval
MSs Change monitor station #
PA Abort Turntable Sampling
TN0 Exit Run Mode; Enter Standby Mode
TN1 Enter Run Mode from any mode (Standby or Menu)
REPORT SYSTEM INFORMATION
V0 Report instrument model number
V1 Report software version number
V2 Report software revision date
RM Report system time, date and measurement parameters
RI Report instrument setup information
To Next Page
Loading...
