54
Figure 4-7
3. If editing a profile or cycle, select the profile requiring modification.
4. Follow Section 4.6.7.1 Adding and Creating Profiles, for changing the variables.
5. If a cycle needs to be removed, select the Remove Cycle button. The user will be asked if the cycle
should be removed. Select
OK to confirm removal. The cycle will be removed.
6. Select Save to save the profile changes.
7. If a profile needs to be deleted, select Delete. The user will be asked if the profile should be removed.
Select OK to confirm the deletion. The profile will be removed from the list of profiles.
4.7 Data Acquisition and Exporting
YSI 2900 Series Analyzer data is communicated to the Multi-Channel Online Monitor System. Data can be
displayed in graphs and tables using the Data icon functions. Data exporting can be accomplished using features
in the Data tab.
4.7.1 Tabulating the Data
The Table tab window is displayed by default. Select the Table tab if it is not displayed. The figure below shows
an example data set.
• The data table will display the vessels sampled, the date/time of analysis, temperature, chemistry and
the analytical result.
• The most recent data will be displayed at the top of the table.
• Use the arrow keys in the upper left hand corner to navigate to other pages. The arrow designations
from left to right are: Start, Back, Forward and End. Alternatively, specific pages can be viewed by
selecting the page number from the dropdown box located next to the arrow keys.
To Next Page
Loading...
