67
Figure 4-22
6. By using the Filter feature many audit entries can be filtered out, which refines the audit display and
increases the search speed. To filter the audit file press the
Filter button. The Filter window will appear as
shown below.
Figure 4-23
7. Enter the filter parameters to refine the search.
•
Start/End Date and Time: Sets the time range of the filter.
•
Keyword: Enter a keyword for your search, if desired.
• Select any
Source and Type data to be included in the filter by checking the box next to the entry. Items
not selected will not be displayed. Contact Technical Support for file selection assistance.
8. Once the parameters are entered, select Save. The filter settings will be set and the display will be
changed using the new filter settings.
To Next Page
Loading...
