UZNKXSUJKY
Connect APP to open more modes
Single mopping mode: The machine only mops the floor (the side brush and the roller brush are
turned on, and the fan is not turned on).
Single sweeping mode: raise the mop, turn on the side brush, roller brush and fan.
Sweeping and mopping integrated mode: Turn on the fan, side brush, and roller brush, and the
mop fits the ground, applying pressure or rotating.
Carpet avoidance mode: when it is turned on: when cleaning (three modes), the carpet is not
cleaned. When it is turned off: In the sweeping and single mopping modes, lift the mop to clean
the floor and turn off the water tank at the same time; in the sweeping mode, directly put on the
carpet; after laying down the carpet, restore the previous cleaning settings.
Carpet booster mode: [Switch] Increase the fan gear to Max when cleaning the carpet.
(Single mopping mode and sweeping and mopping integrated mode, the machine needs to be
equipped with a mop to start. When it encounters a carpet, it will automatically lift the mop, stop
the rotation of the mop, turn off the water tank, and avoid wetting the carpet. When entering,
pausing, and exiting, there will be a voice broadcast.) Users can adjust according to the actual
situation.
/TYZX[IZOUTYLUX[YK
To Next Page
Loading...
