Do not disassmeble, squeeze, puncture the product or put it into water,
fire, or exposes it to temperature higher than 60℃ (140℉)
Important Notice:
YUNMAI Smart Scale should not be used to diagnose or treat any
medical situation.
Notice before Use
* Please ingore the first weighing reading at your first time use or after
move the scale.
* After scale power on or reset, please wait for the LED display flash
"0.0" for several seconds, and then start your weight-in.
* After each move of the scale, please wait for 5 seconds for the sensor
to self-recalibarate with the floor, and then weight for accurate reading.
Statement:
To Next Page
Loading...
