Z-CAM E2 Flagship Series - Page 24

 Encoder: None / AAC / PCM
 Input: Off / Microphone / XLR / Mic Left + XLR Right / Mic Right + XLR Left

Off：Turn off all audio input.

Microphone：The camera will use built-in microphone as audio input if there is
no external microphone plugged into the 3.5mm audio-in port, and will use the
external microphone if there is one plugged into the 3.5mm audio-in port.

XLR：Take XLR port as audio-in

Mic Left + XLR Right: Take 3.5mm audio-in(microphone) left channel, and
XLR port right channel to merge for audio-in

Mic Right + XLR Left: Take 3.5mm audio-in(microphone) right channel, and
XLR port left channel to merge for audio-in
 Input Level: Mic Level / Line Level
 Input Gain: -18~6dB,canbesetmanually.
 Output Gain: -6 ~ 6 dB, can be set manually.
 Phantom Power: Enable / Disable. Available when “Input” is set to “XLR”,” Mic Left +
XLR Right” and “Mic Right + XLR Left” to enable or disable the phantom power of the
XLR port.
 Audio Level Display: Disable / Enable
，
enabling this setting displays the audio level
on the standby screen.