4
Charging the Battery
Charge the battery by connecting the camera to a computer or other USB charging
adapter with the Micro USB cable included.
Power On
Press and hold the (1) Power/Mode button for 3 seconds. The (14) Status LED
Indicator lights will flash, the display screen will turn on and a rising sound indicator
chord will be heard.
Power Off
Press and hold the (1) Power/Mode button for 3 seconds. The (14) Status LED
Indicator lights will flash, the display screen will turn off and a descending sound
indicator chord will be heard.
Storage
The X3 Camera is compatible with TF/microSD memory cards up to 64GB capacity.
Please use TF/microSD cards of class 10 and above for optimal performance and
reliability. Format memory cards the first time you use them.
Inserting Card
Slide the TF/microSD cards into the card slot (10), when fully inserted the card clicks
into place.
Removing Card
To remove, place your fingernail against the edge of the memory card and lightly
press it further into the camera. The memory card will spring out for removal.
Connecting via WiFi
Connect the X3 Camera to a mobile device via WiFi using the ‘Z-VergeX3’ app.
Control the camera shutter and change basic settings remotely via the app (effective
range up to 33 feet / 10 meters), or download video and photo files directly to your
mobile device. To setup a connection please follow the steps below:
1. Download and install the ‘Z-VergeX3’ app from your mobile device’s app store.
To Next Page
Loading...
Need help?
General
