Power Level(V1)
Can be used under inclusion to test signal strength from the controller and to the device.
Security(V1)
See Z-Wave documentation.
Security(V2)
This product support S2_ACCESS security class.
Supervision(V1)
See Z-Wave documentation.
Transport Service(V2)
See Z-Wave documentation.
User Code(V2)
Lock will accept maximum 100 pin codes that has 4-10 digits in length.
- Support Users : 100
- ID Range : 1 ~ 100
Version(V2)
This command Class is used to get information about which version of the different command
classes the GKBC-3100Z supports and the software version of the GKBC-3100Z.
To Next Page
Loading...
Need help?
General