Do you have a question about the Zachry MS-652 and is the answer not in the manual?
nominal impedance | 4 ohms |
---|---|
dc resistance | 3.4 ohms |
resonant frequency | 80 Hz |
mechanical Q | 2.99 |
electrical Q | 0.76 |
total Q | 0.61 |
Xmax (linear) | 0.0512 in |
Xmax (mechanical) | 0.0768 in |
sensitivity 1 watt / 1 meter | 88 dB |
effective piston area | 0.0122 m2 |
acoustic compliance | 0.3173 cf |
moving mass | 9.12 grams |
suspension compliance | 425 m/N |
motor strength | 4.55 TM |
voice coil diameter | 1 in |
---|---|
voice coil length | 0.299 in |
voice coil layers | 2 |
voice coil type | Kapton |
continuous power | 50 watts |
maximum power | 100 watts |
magnet OD | 3.15 in |
---|---|
magnet thickness | 0.59 in |
magnet weight | 10 oz |
frame OD | 6.42 in |
mounting hole | 5.53 in |
mounting depth | 2.5 in |
speaker weight | 1.96 lbs /pc |
driver displacement | 92.63 in |
high-pass / slope | 4K / 12 Hz / dB |
---|---|
low-pass / slope | Pass |
nominal impedance | 4 ohms |
---|---|
dc resistance | 3.7 ohms |
resonant frequency | 55 Hz |
mechanical Q | 3.23 |
electrical Q | 0.91 |
total Q | 0.71 |
Xmax (linear) | 0.0984 in |
Xmax (mechanical) | 0.1476 in |
sensitivity 1 watt / 1 meter | 89 dB |
effective piston area | 0.0220 m2 |
acoustic compliance | 0.9355 cf |
moving mass | 21.10 grams |
suspension compliance | 385 m/N |
motor strength | 5.48 TM |
voice coil diameter | 1.2 in |
---|---|
voice coil length | 0.433 in |
voice coil layers | 2 |
voice coil type | Kapton |
continuous power | 60 watts |
maximum power | 120 watts |
magnet OD | 3.94 in |
---|---|
magnet thickness | 0.59 in |
magnet weight | 14 oz |
frame OD | 9.37 x 6.61 in |
mounting hole | 8.82 x 6.06 in |
mounting depth | 3.27 in |
speaker weight | 3.15 lbs /pc |
driver displacement | 141.70 in |
high-pass / slope | 3.5K / 12 Hz / dB |
---|---|
low-pass / slope | Pass |