Zagg Airtime Pro 2 SE

To Next Page

AIRTIME

™

PRO 2 SE

TRULY WIRELESS EARBUDS

Quick Start Guide

Factory Reset

If you have functionality issues, a factory

reset can help. Here’s how to perform one.

1. Place both buds in the case.

2. Reset the right bud.

a. Remove the right bud from the case.

b. Tap and hold for 10 seconds until light

ﬂashes red and turns off.

c. Wait 10 seconds after red ﬂashing

light.

d. Tap and hold for ﬁve seconds until light

turns on and ﬂashes red and white.

e. Quickly tap the bud six times;

the light will turn off.

f. Return the bud to the case.

3. Reset the left bud.

a. Repeat steps above, same as right bud.

4. Connect the left and right earbuds

by removing them from the case and

allowing them to connect to each other

for about ﬁve seconds. Once connected

to each other, earbuds will ﬂash red and

white indicating pairing mode. Remove

the right bud from the case.

5. The earbuds are now reset to factory

settings. You will need to remove the

previous pairing from your device’s

Bluetooth

settings. Once removed,

follow pairing instructions at the

beginning of this quick start guide.

Having Trouble?

Our IFROGZ customer support team is

available should you have any needs:

Online: www.support.zagg.com

Or give us a call at: 1-800-700-9244

Need help?

Do you have a question about the Zagg Airtime Pro 2 SE and is the answer not in the manual?

Summary

Introduction to Airtime Pro 2 SE

Simple Pairing Guide

Steps to pair the IFROGZ Airtime Pro 2 SE earbuds with a device via Bluetooth.

Earbud Touch Controls

Using the Earbuds

Turning Earbuds On and Off

Instructions for powering the IFROGZ Airtime Pro 2 SE earbuds on and off using the charging case.

Achieving the Best Earbud Fit

Charging the Wireless Earbuds

How to place earbuds in the charging case for power and check indicator lights.

Charging the Case

Wireless Charging Method

Steps to charge the IFROGZ Airtime Pro 2 SE case using a compatible wireless charging pad.

Manual Charging Method

Steps to charge the case using the included USB-C cable and a power outlet.

Quick Charge Feature

Checking the Battery Level

Factory Reset Procedure

Troubleshooting and Support

Customer Support Contact

Contact information for online support and phone assistance for IFROGZ products.