33
For contractors
Direct tap for instantaneous water heaters
D 149 – Special bath mixer tap
Part no. 18 67 71
D 159 – Special bath mixer tap, mono-lever mixer tap
Part no. 18 76 13
D 169 – Special mixer tap with swivel arm
Part no. 18 67 73
Part no. 22 77 01
comprising:
– Mounting frame with
– Wiring.
This assembly creates a gap of 30 mm between the appliance back panel and the installation wall.
This increases the equipment depth by 30 mm. This set reduces the protection to IP 24 (splashproof).
Part no. 22 77 02
comprising:
22 77 01).
– Pipe bends for a vertical offset of the appliance relative to the water connection by 90 mm
downwards.
Part no. 22 77 03
comprising:
22 77 01).
– Pipe bends for the installation with existing gas water heater connections
(cold water on the left and DHW on the right).
Part no. 00 17 86
Priority control of the instantaneous water heater when operating, for example, electric storage heaters
simultaneously. For connection of the LR 1-A see
L
.
8. Special accessories
To Next Page
Loading...