Zap HSM-B131B User Manual

3
ASSEMBLY INSTRUCTIONS
1. Install the Ball Pin.
Pull the ball pin out to expand the main frame, and then
2. Install the Front and Rear Stabilizers.
Loose the screws in the stabilizer, and insert them into the
corresponding grooves and tighten in each stabilizer.
3. Install the Handlebar and Control Panel
Place the handlebar onto the corresponding grooves in the
main frame, tighten it with bolts and gaskets. Connect the
cords with the corresponding slots, and then place the
control panel onto the main frame and tighten.
A

Zap HSM-B131B Specifications

General

Brand	Zap
Model	HSM-B131B
Category	Fitness Equipment
Language	English